NES cartridge dimensions: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (Added new section specifically for PCB vs Cartridge.)
(Add measurements for the nearly the rest of the cartridge types)
Line 1: Line 1:


== NES Cartridge Outline ==
== NES cartridge shell outline ==
New measurements are needed.
''TODO: measure and publish dimensions''


== NES Cartridge PCB Outline ==
== NES Cartridge PCB Outline ==
On the right is a diagram showing the basic outline of an NROM PCB.
This outline is based on measurements from a NES-EWROM-01 type cartridge PCB, segmented with cutouts of of other cartridge types. These measurements are measured with vernier calipers with 0.05 mm accuracy, Base measurements assume 0.05 mm grid. Note that this outline also details where the soldermask ends for the card edge.
[[File:NROMPCBdimensions.jpg|thumb]]


== NES cartridge pin dimensions ==
[[File:NES-EWROM-01.svg|frame|center|Technical drawing of the outlines of an NES-EWROM-01 type cartridge PCB.]]
On the right is a diagram showing the pin dimensions and their pitch (spacing). Note: the pitch is 2.50 millimeters (0.0984 inches), '''not''' the standard 2.54 millimeters (0.100 inches) that is very common today for dual-inline package chips.
[[File:NEScartPCBpindimensions.jpg|thumb]]


== XDraft ==
{| class="wikitable" align="center" style="margin: auto;"
[http://xdraft.sf.net XDraft 2D CAD/Drafting Program]
!colspan="3"|Dimensions
(This page previously had schematics made in Xdraft on it.)
|-
|Designator ||Dimensions in mm (±0.05 mm) ||Description
|-
|A ||100 ||Board width
|-
|A.1 ||90 ||Notched width
|-
|A.2 ||97 ||Notched width
|-
|A.3 ||93.5 ||Card edge width
|-
|A.4 ||50 ||Tab width for cutout 2
|-
|A.5 ||50 ||Hole center to PCB edge for cutout 4 / 5
|-
|A.6 ||44.5 ||Hole center to PCB edge for cutout 4 / 5
|-
|A.7 ||3.5 ||Hole diameter  for cutout 4 / 5
|-
|A.8 ||5.5 ||Hole diameter  for cutout 4 / 5
|-
|A.9 ||3.5 ||Notched width
|-
|B.1 ||25.5 ||Board height for cutout 1
|-
|B.2 ||40.5 ||Board height for cutout 2
|-
|B.3 ||44.5 ||Board height for cutout 3
|-
|B.4 ||65.5 ||Board height for cutout 4
|-
|B.5 ||95.5 ||Board height for cutout 5
|-
|B.6 ||14.5 ||Card edge depth
|-
|B.7 ||6 ||Notch height
|-
|B.8 ||2.5 ||Notch height
|-
|B.9 ||2 ||Notch height
|-
|B.10 ||8.75 ||Hole center to PCB edge for cutout 4 / 5
|-
|B.11 ||18.25 ||Hole center to PCB edge for cutout 4 / 5
|-
|C ||1.2 ||Board thickness
|-
|D.1 ||6.5 ||Card edge base to front soldermask keepout
|-
|D.2 ||3.5 ||Card edge base to back soldermask keepout
|-
|D.3 ||1.5 ||Card edge base to pad top
|-
|D.4 ||12 ||Card edge pad height
|-
|E.1 ||1 ||Card edge to edge pad side
|-
|E.2 ||3 ||Edge pad width
|-
|E.3 ||0.5 ||Distance between pads
|-
|E.4 ||2 ||Pad width
|-
|E.5 ||2.5 ||Pad spacing
|}


== Label dimensions ==
== Label dimensions ==

Revision as of 15:34, 18 September 2022

NES cartridge shell outline

TODO: measure and publish dimensions

NES Cartridge PCB Outline

This outline is based on measurements from a NES-EWROM-01 type cartridge PCB, segmented with cutouts of of other cartridge types. These measurements are measured with vernier calipers with 0.05 mm accuracy, Base measurements assume 0.05 mm grid. Note that this outline also details where the soldermask ends for the card edge.

Technical drawing of the outlines of an NES-EWROM-01 type cartridge PCB.
Dimensions
Designator Dimensions in mm (±0.05 mm) Description
A 100 Board width
A.1 90 Notched width
A.2 97 Notched width
A.3 93.5 Card edge width
A.4 50 Tab width for cutout 2
A.5 50 Hole center to PCB edge for cutout 4 / 5
A.6 44.5 Hole center to PCB edge for cutout 4 / 5
A.7 3.5 Hole diameter for cutout 4 / 5
A.8 5.5 Hole diameter for cutout 4 / 5
A.9 3.5 Notched width
B.1 25.5 Board height for cutout 1
B.2 40.5 Board height for cutout 2
B.3 44.5 Board height for cutout 3
B.4 65.5 Board height for cutout 4
B.5 95.5 Board height for cutout 5
B.6 14.5 Card edge depth
B.7 6 Notch height
B.8 2.5 Notch height
B.9 2 Notch height
B.10 8.75 Hole center to PCB edge for cutout 4 / 5
B.11 18.25 Hole center to PCB edge for cutout 4 / 5
C 1.2 Board thickness
D.1 6.5 Card edge base to front soldermask keepout
D.2 3.5 Card edge base to back soldermask keepout
D.3 1.5 Card edge base to pad top
D.4 12 Card edge pad height
E.1 1 Card edge to edge pad side
E.2 3 Edge pad width
E.3 0.5 Distance between pads
E.4 2 Pad width
E.5 2.5 Pad spacing

Label dimensions

An NES Game Pak label measures roughly 55x97 mm, with the top 7 mm of that in the fold-over. But actual printing will need a bit of extra space for the bleed area. Here's a template showing the approximate size of a label for a standard NES cartridge.

acfrazier recommended printing cart labels on Avery 5164, Avery 5264, or Avery 8164 (4x3.33 in) labels.

Retrieved from "https://www.nesdev.org/w/index.php?title=NES_cartridge_dimensions&oldid=19840"