RP2C33 pinout: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
m (Added value of feedback resistor in first amplifier.) |
(not sure how best to indicate open drain outputs - if somebody has a better idea, feel free to update) |
||
Line 12: | Line 12: | ||
(f) CPU A8 -> | 08 57 | <- R/W (rf) | (f) CPU A8 -> | 08 57 | <- R/W (rf) | ||
(r) PRG A6/13 <- | 09 56 | <- M2 (Rf) | (r) PRG A6/13 <- | 09 56 | <- M2 (Rf) | ||
(r) PRG A5/12 <- | 10 55 | | (r) PRG A5/12 <- | 10 55 | +> /IRQ (f) | ||
(r) PRG A4/11 <- | 11 54 | -> Audio (f) | (r) PRG A4/11 <- | 11 54 | -> Audio (f) | ||
(r) PRG A3/10 <- | 12 53 | <- ? (gnd) | (r) PRG A3/10 <- | 12 53 | <- ? (gnd) | ||
(r) PRG A2/9 <- | 13 52 | | (r) PRG A2/9 <- | 13 52 | +> SER OUT | ||
(r) PRG A1/8 <- | 14 51 | <- SER IN | (r) PRG A1/8 <- | 14 51 | <- SER IN | ||
(r) PRG A0 <- | 15 50 | | (r) PRG A0 <- | 15 50 | +> $4025W.2 (Disk 1=Read, 0=Write) | ||
(rf) CPU A7 -> | 16 49 | | (rf) CPU A7 -> | 16 49 | +> $4025W.1 (1=Reset transfer timing) | ||
(f) CPU A6 -> | 17 48 | | (f) CPU A6 -> | 17 48 | +> $4025W.0 (1=Turn on motor) | ||
(f) CPU A5 -> | 18 47 | <- $4032R.2 (1=Write protected) | (f) CPU A5 -> | 18 47 | <- $4032R.2 (1=Write protected) | ||
(f) CPU A4 -> | 19 46 | <- $4032R.1 (1=Disk not ready) | (f) CPU A4 -> | 19 46 | <- $4032R.1 (1=Disk not ready) | ||
(f) CPU A3 -> | 20 45 | <- $4032R.0 (1=Disk missing) | (f) CPU A3 -> | 20 45 | <- $4032R.0 (1=Disk missing) | ||
(f) CPU A2 -> | 21 44 | <> EXT0 | (f) CPU A2 -> | 21 44 | <+> EXT0 | ||
(f) CPU A1 -> | 22 43 | <> EXT1 | (f) CPU A1 -> | 22 43 | <+> EXT1 | ||
(f) CPU A0 -> | 23 42 | <> EXT2 | (f) CPU A0 -> | 23 42 | <+> EXT2 | ||
? <- | 24 41 | <> EXT3 | ? <- | 24 41 | <+> EXT3 | ||
(rf) CPU D0 <> | 25 40 | <> EXT4 | (rf) CPU D0 <> | 25 40 | <+> EXT4 | ||
(rf) CPU D1 <> | 26 39 | <> EXT5 | (rf) CPU D1 <> | 26 39 | <+> EXT5 | ||
(rf) CPU D2 <> | 27 38 | <> EXT6 | (rf) CPU D2 <> | 27 38 | <+> EXT6 | ||
(rf) CPU D3 <> | 28 37 | <> EXT7/BATT | (rf) CPU D3 <> | 28 37 | <+> EXT7/BATT | ||
(rf) CPU D4 <> | 29 36 | <- PPU A10 (f) | (rf) CPU D4 <> | 29 36 | <- PPU A10 (f) | ||
(rf) CPU D5 <> | 30 35 | <- PPU A11 (f) | (rf) CPU D5 <> | 30 35 | <- PPU A11 (f) | ||
Line 39: | Line 39: | ||
r - connects to DRAM (all revisions) | r - connects to DRAM (all revisions) | ||
f - connects to Famicom | f - connects to Famicom | ||
+ - output is open-drain | |||
Expansion audio mixing circuit schematic: | Expansion audio mixing circuit schematic: |
Revision as of 18:27, 21 April 2022
Family Computer Disk System ASIC RP2C33 or RP2C33A: 64-pin shrink DIP (FDS files)
.---\/---. (Rf) /ROMSEL -> | 01 64 | -- +5V (Rf) CPU A14 -> | 02 63 | <- XTAL2 (Rf) CPU A13 -> | 03 62 | -> XTAL1 (f) CPU A12 -> | 04 61 | <- ? (gnd) (f) CPU A11 -> | 05 60 | -> /RAS (r) (f) CPU A10 -> | 06 59 | -> /CAS1 (r) (f) CPU A9 -> | 07 58 | -> /CAS0 (r) (f) CPU A8 -> | 08 57 | <- R/W (rf) (r) PRG A6/13 <- | 09 56 | <- M2 (Rf) (r) PRG A5/12 <- | 10 55 | +> /IRQ (f) (r) PRG A4/11 <- | 11 54 | -> Audio (f) (r) PRG A3/10 <- | 12 53 | <- ? (gnd) (r) PRG A2/9 <- | 13 52 | +> SER OUT (r) PRG A1/8 <- | 14 51 | <- SER IN (r) PRG A0 <- | 15 50 | +> $4025W.2 (Disk 1=Read, 0=Write) (rf) CPU A7 -> | 16 49 | +> $4025W.1 (1=Reset transfer timing) (f) CPU A6 -> | 17 48 | +> $4025W.0 (1=Turn on motor) (f) CPU A5 -> | 18 47 | <- $4032R.2 (1=Write protected) (f) CPU A4 -> | 19 46 | <- $4032R.1 (1=Disk not ready) (f) CPU A3 -> | 20 45 | <- $4032R.0 (1=Disk missing) (f) CPU A2 -> | 21 44 | <+> EXT0 (f) CPU A1 -> | 22 43 | <+> EXT1 (f) CPU A0 -> | 23 42 | <+> EXT2 ? <- | 24 41 | <+> EXT3 (rf) CPU D0 <> | 25 40 | <+> EXT4 (rf) CPU D1 <> | 26 39 | <+> EXT5 (rf) CPU D2 <> | 27 38 | <+> EXT6 (rf) CPU D3 <> | 28 37 | <+> EXT7/BATT (rf) CPU D4 <> | 29 36 | <- PPU A10 (f) (rf) CPU D5 <> | 30 35 | <- PPU A11 (f) (rf) CPU D6 <> | 31 34 | -> CIRAM A10 (f) GND -- | 32 33 | <> CPU D7 (rf) '--------' R - connects to LH2833 DRAM in later PCB revisions r - connects to DRAM (all revisions) f - connects to Famicom + - output is open-drain Expansion audio mixing circuit schematic: 1.2M +---/\/---+ + | | 56K From RP2C33---||---/\/---+---|>o---+---+---/\/---+ (RP2C33.54) 1u 2M | | 0.1u --- | --- | | | 100K GND | +---/\/---+ | + | | From 2A03----------------------------------/\/---+---||---+---|>o---+---To RF (Cart.45) 56K 1u (Cart.46)
Notes:
- PRG address bus is multiplexed, as is typical for DRAMs.
- EXT port can be written via $4026 and read via $4033
Transcribed from http://green.ap.teacup.com/junker/119.html