Oeka Kids tablet: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (add category)
(Clarified when it advances. Left-shifted the $4017 bits.)
Line 9: Line 9:
  xxxx xxAS
  xxxx xxAS
         ||
         ||
         |+- Strobe (0 = Latch, 1 = Read back)
         |+- Strobe (0 = Latch, 1 = Read mode)
         +-- Advance to next bit
         +-- Advance to next bit


To advance to the next bit, set A to 0 and then to 1. Bits can only be read while S is set to 1.
Bits can be read only while S is 1. It advances to the next bit when S is 1 and A transitions from 0 to 1.  


=== Output ($4017 read) ===
=== Output ($4017 read) ===
Line 18: Line 18:
  7  bit  0
  7  bit  0
  ---- ----
  ---- ----
  xxxx xDSx
  xxxx DSxx
      ||
      ||
      |+-- 0 if strobe is 1, 1 otherwise.
      |+-- 0 if strobe is 1, 1 otherwise.
      +--- (Inverted) Serial data if strobe is 1, 0 if strobe is 0.
      +--- (Inverted) Serial data if strobe is 1, 0 if strobe is 0.


The serial data is returned ''most significant bit first'', and inverted.
The serial data is returned ''most significant bit first'', and inverted (including the touch and click bits).


  $4017.2
  $4017.2

Revision as of 20:20, 5 April 2016

The Oeka Kids tablet is a Famicom accessory from Bandai that resembles a drawing tablet, and plugs into the expansion port. There are two known games that use this peripheral, both of which contain a variety of activities, such as painting, drawing lessons, hiragana lessons, and a variety of minigames such as mazes and sliding puzzles.

Very little information about this accessory is available, and only basic reverse engineering has been performed so far. As such, this information may be incorrect, but it seems to be acceptable for the two commercial games that use it.

Input ($4016 write)

7  bit  0
---- ----
xxxx xxAS
       ||
       |+- Strobe (0 = Latch, 1 = Read mode)
       +-- Advance to next bit

Bits can be read only while S is 1. It advances to the next bit when S is 1 and A transitions from 0 to 1.

Output ($4017 read)

7  bit  0
---- ----
xxxx DSxx
     ||
     |+-- 0 if strobe is 1, 1 otherwise.
     +--- (Inverted) Serial data if strobe is 1, 0 if strobe is 0.

The serial data is returned most significant bit first, and inverted (including the touch and click bits).

$4017.2
   ^
   |  <-- <-- <-- <--
   XXXXXXXXYYYYYYYYBA
   ||||||||||||||||||
   |||||||||||||||||+- Click
   ||||||||||||||||+-- Stylus is touching tablet
   ||||||||++++++++--- Stylus Y, scaled to 0-255
   ++++++++----------- Stylus X, scaled to 0-239