NES 2.0 Mapper 432: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
NewRisingSun (talk | contribs) No edit summary |
NewRisingSun (talk | contribs) (Update with new information from 160000000-in-1 cart) |
||
| Line 1: | Line 1: | ||
{{DEFAULTSORT:432}}[[Category:Multicart mappers]][[Category:MMC3-like mappers]][[Category:Mappers with scanline IRQs]] | {{DEFAULTSORT:432}}[[Category:Multicart mappers]][[Category:MMC3-like mappers]][[Category:Mappers with scanline IRQs]] | ||
'''NES 2.0 Mapper 430''' denotes the MMC3-based Realtec '''8090''' multicart circuit board | '''NES 2.0 Mapper 430''' denotes the MMC3-based Realtec '''8090''' multicart circuit board. | ||
* ''3-in-1 High Standerd [sic] (DP-33)'' | |||
* ''160000000-in-1'' (unknown cartridge code) | |||
== | ==Solder Pad Enable Register ($6000-$7FFE, even)== | ||
Mask: $ | Mask: $E001 | ||
D~7654 3210 | D~7654 3210 | ||
--------- | --------- | ||
... | .... ...S | ||
+- 1=Replace PRG-ROM with solder pad value | |||
in the CPU $8000-$FFFF address range | |||
==Outer Bank Register ($6001-$7FFF, odd)== | |||
Mask: $E001 | |||
D~7654 3210 | |||
--------- | |||
?N.P CmMb | |||
| | |||+- PRG/CHR A17 if M=1 | |||
| | ||+-- PRG A17 mode | |||
| | || 0: from MMC3 (256 KiB inner bank) | |||
| | || 1: from b (128 KiB inner bank) | |||
| | |+--- CHR A17 mode | |||
| | | 0: from MMC3 (256 KiB inner bank) | |||
| | | 1: from b (128 KiB inner bank) | |||
| | +---- CHR A18 | |||
| +------ PRG A18 | |||
+-------- NROM-128 mode (1=enabled) | |||
As it uses the MMC3 clones's WRAM interface, writing to the outer bank register requires enabling and not write-protecting WRAM in the MMC's $A001 register. | As it uses the MMC3 clones's WRAM interface, writing to the outer bank register requires enabling and not write-protecting WRAM in the MMC's $A001 register. | ||
NROM-128 mode forces the MMC3 clone's CPU A14 input low, causing MMC3 register 6 to select both the bank at $8000 and $C000, and register 7 to select both the bank at $A000 and $E000. | |||
==MMC3-compatible registers ($8000-$FFFF)== | ==MMC3-compatible registers ($8000-$FFFF)== | ||
Mask: $E001 | Mask: $E001 | ||
See [[MMC3]]. | See [[MMC3]]. | ||
Revision as of 20:10, 15 February 2022
NES 2.0 Mapper 430 denotes the MMC3-based Realtec 8090 multicart circuit board.
- 3-in-1 High Standerd [sic] (DP-33)
- 160000000-in-1 (unknown cartridge code)
Solder Pad Enable Register ($6000-$7FFE, even)
Mask: $E001
D~7654 3210
---------
.... ...S
+- 1=Replace PRG-ROM with solder pad value
in the CPU $8000-$FFFF address range
Outer Bank Register ($6001-$7FFF, odd)
Mask: $E001 D~7654 3210 --------- ?N.P CmMb | | |||+- PRG/CHR A17 if M=1 | | ||+-- PRG A17 mode | | || 0: from MMC3 (256 KiB inner bank) | | || 1: from b (128 KiB inner bank) | | |+--- CHR A17 mode | | | 0: from MMC3 (256 KiB inner bank) | | | 1: from b (128 KiB inner bank) | | +---- CHR A18 | +------ PRG A18 +-------- NROM-128 mode (1=enabled)
As it uses the MMC3 clones's WRAM interface, writing to the outer bank register requires enabling and not write-protecting WRAM in the MMC's $A001 register. NROM-128 mode forces the MMC3 clone's CPU A14 input low, causing MMC3 register 6 to select both the bank at $8000 and $C000, and register 7 to select both the bank at $A000 and $E000.
MMC3-compatible registers ($8000-$FFFF)
Mask: $E001
See MMC3.
