View source for MOD RF

This is a description of the daughterboard attached to the main NES logic board with a 5-pin soldered header.

==Versions==
===Alps===
====Parts List====
Note:  Surface-mount and uninstalled components are not listed
*C19-20:  R 472M 4700pF 2KV ceramic disc capacitors
*C21:  2200µF 25V electrolytic capacitor
*C23:  100µF 25V electrolytic capacitor
*C25:  100µF 10V electrolytic capacitor
*C29,C35:  1µF 50V electrolytic capacitors
*C36:  10µF 16V electrolytic capacitor
*D1-4:  "N 8" rectifier diodes
*L1:  2.2µH 20% inductor
*L3:  0.48µH hand-wound inductor
*L4:  0.39µH hand-wound inductor
*L6:  0.32µH hand-wound inductor
*L8:  220nH inductor
*L9:  68µH 20% inductor
*L?:  0.1µH hand-wound inductor
*Q1,Q4-5:  2SC1740 NPN transistor
*Q2:  2SC461 NPN transistor (Must use VHF-capable speeds if substituting)
*R7:  15K Ohms 5% resistor
*R19:  1K Ohms 5% resistor
*R20:  1.8K Ohms 5% resistor
*R22:  10K Ohms 5% resistor
*R24:  105 Ohms 5% resistor
*R25:  82 Ohms 5% resistor

====Schematics====
[[Image:GLEEOfl_full.jpg|200px]]
Components as placed on non-solder (through-hole component) side of board.

===Mitsumi===
====Parts List====
====Schematics====