View source for Bandai M60001-0115P pinout

[[Category:Pinouts]](Bandai) Mitsubishi M60001-0115P: 28-pin 0.6" PDIP ([[iNES Mapper 188]])

             .--\/--.
     blue -> |01  28| -- +5V
   yellow -> |02  27| -> internal PRG /CE
   orange -> |03  26| -> external PRG /CE
  PPU A11 -> |04  25| -> VRAM A10
  PPU A10 -> |05  24| -> LatchedD6
  ROM R/W -> |06  23| -> PRG A14
  /ROMSEL -> |07  22| -> PRG A15
  CPU A14 -> |08  21| -> PRG A16
  CPU A13 -> |09  20| -> PRG A17
  CPU A12 -> |10  19| ??
  CPU D0  <> |11  18| <- CPU D6
  CPU D1  <> |12  17| <- CPU D5
  CPU D2  <> |13  16| <- CPU D4
      GND -- |14  15| <- CPU D3
             '------'

The color names were silkscreened on the PCB. They are the wires from the microphone.

This mapper has the dubious distinction of failing to prevent bus conflicts but also being too complex to comfortably say "it's
just a couple silicon dice in a single package", unlike the [[Sunsoft 1 pinout|Sunsoft-1]] and
[[Sunsoft 2 pinout|-2]]. The described functionality is equivalent to ''five'' 74xx ICs. (74377, ½ 74139, ½ 7420, ½ 74244, 7432)

The M60001 prefix was used by Mitsubishi for custom orders: the M60001-0103P was
used in the Joyball for the Famicom: [http://www.raphnet.net/electronique/famicom_to_nes/index_en.php]

See also: [http://seesaawiki.jp/famicomcartridge/d/%a5%ab%a5%e9%a5%aa%a5%b1%a5%b9%a5%bf%a5%b8%a5%aa naruko's writeup]